2.6 kernel makefile-凯发app官方网站

2.5.59 kernel makefile documentation
[posted february 4, 2003 by corbet]

linux kernel makefiles

this document describes the linux kernel makefiles.

=== table of contents

    === 1 overview
    === 2 who does what
    === 3 the kbuild makefiles
       --- 3.1 goal definitions
       --- 3.2 built-in object goals - obj-y
       --- 3.3 loadable module goals - obj-m
       --- 3.4 objects which export symbols - export-objs
       --- 3.5 library file goals - l_target
       --- 3.6 descending down in directories
       --- 3.7 compilation flags
       --- 3.8 command line dependency
       --- 3.9 dependency tracking
       --- 3.10 special rules

    === 4 host program support
       --- 4.1 simple host program
       --- 4.2 composite host programs
       --- 4.3 defining shared libraries  
       --- 4.4 using c for host programs
       --- 4.5 controlling compiler options for host programs
       --- 4.6 when host programs are actually built

    === 5 kbuild clean infrastructure

    === 6 architecture makefiles
       --- 6.1 set variables to tweak the build to the architecture
       --- 6.2 add prerequisites to prepare:
       --- 6.3 list directories to visit when descending
       --- 6.4 architecture specific boot images
       --- 6.5 building non-kbuild targets
       --- 6.6 commands useful for building a boot image
       --- 6.7 custom kbuild commands

    === 7 kbuild variables
    === 8 makefile language
    === 9 credits
    === 10 todo

=== 1 overview

the makefiles have five parts:

    makefile        the top makefile.
    .config            the kernel configuration file.
    arch/$(arch)/makefile    the arch makefile.
    scripts/makefile.*    common rules etc. for all kbuild makefiles.
    kbuild makefiles    there are about 500 of these.

the top makefile reads the .config file, which comes from the kernel
configuration process.

the top makefile is responsible for building two major products: vmlinux
(the resident kernel image) and modules (any module files).
it builds these goals by recursively descending into the subdirectories of
the kernel source tree.
the list of subdirectories which are visited depends upon the kernel
configuration. the top makefile textually includes an arch makefile
with the name arch/$(arch)/makefile. the arch makefile supplies
architecture-specific information to the top makefile.

each subdirectory has a kbuild makefile which carries out the commands
passed down from above. the kbuild makefile uses information from the
.config file to construct various file lists used by kbuild to build
any built-in or modular targets.

scripts/makefile.* contains all the definitions/rules etc. that
are used to build the kernel based on the kbuild makefiles.


=== 2 who does what

people have four different relationships with the kernel makefiles.

*users* are people who build kernels.  these people type commands such as
"make menuconfig" or "make".  they usually do not read or edit
any kernel makefiles (or any other source files).

*normal developers* are people who work on features such as device
drivers, file systems, and network protocols.  these people need to
maintain the kbuild makefiles for the subsystem that they are
working on.  in order to do this effectively, they need some overall
knowledge about the kernel makefiles, plus detailed knowledge about the
public interface for kbuild.

*arch developers* are people who work on an entire architecture, such
as sparc or ia64.  arch developers need to know about the arch makefile
as well as kbuild makefiles.

*kbuild developers* are people who work on the kernel build system itself.
these people need to know about all aspects of the kernel makefiles.

this document is aimed towards normal developers and arch developers.


=== 3 the kbuild makefiles

most makefiles within the kernel are kbuild makefiles that use the
kbuild infrastructure. this chapter introduce the syntax used in the
kbuild makefiles.

section 3.1 "goal definitions" is a quick intro, further chapters provide
more details, with real examples.

--- 3.1 goal definitions

    goal definitions are the main part (heart) of the kbuild makefile.
    these lines define the files to be built, any special compilation
    options, and any subdirectories to be entered recursively.

    the most simple kbuild makefile contains one line:

    example:
        obj-y = foo.o

    this tell kbuild that there is one object in that directory named
    foo.o. foo.o will be build from foo.c or foo.s.

    if foo.o shall be built as a module, the variable obj-m is used.
    therefore the following pattern is often used:

    example:
        obj-$(config_foo) = foo.o

    $(config_foo) evaluates to either y (for built-in) or m (for module).
    if config_foo is neither y nor m, then the file will not be compiled
    nor linked.

--- 3.2 built-in object goals - obj-y

    the kbuild makefile specifies object files for vmlinux
    in the lists $(obj-y).  these lists depend on the kernel
    configuration.

    kbuild compiles all the $(obj-y) files.  it then calls
    "$(ld) -r" to merge these files into one built-in.o file.
    built-in.o is later linked into vmlinux by the parent makefile.

    the order of files in $(obj-y) is significant.  duplicates in
    the lists are allowed: the first instance will be linked into
    built-in.o and succeeding instances will be ignored.

    link order is significant, because certain functions
    (module_init() / __initcall) will be called during boot in the
    order they appear. so keep in mind that changing the link
    order may e.g.  change the order in which your scsi
    controllers are detected, and thus you disks are renumbered.

    example:
        #drivers/isdn/i4l/makefile
        # makefile for the kernel isdn subsystem and device drivers.
        # each configuration option enables a list of files.
        obj-$(config_isdn)             = isdn.o
        obj-$(config_isdn_ppp_bsdcomp) = isdn_bsdcomp.o

--- 3.3 loadable module goals - obj-m

    $(obj-m) specify object files which are built as loadable
    kernel modules.

    a module may be built from one source file or several source
    files. in the case of one source file, the kbuild makefile
    simply adds the file to $(obj-m).

    example:
        #drivers/isdn/i4l/makefile
        obj-$(config_isdn_ppp_bsdcomp) = isdn_bsdcomp.o

    note: in this example $(config_isdn_ppp_bsdcomp) evaluates to 'm'

    if a kernel module is built from several source files, you specify
    that you want to build a module in the same way as above.

    kbuild needs to know which the parts that you want to build your
    module from, so you have to tell it by setting an
    $(-objs) variable.

    example:
        #drivers/isdn/i4l/makefile
        obj-$(config_isdn) = isdn.o
        isdn-objs := isdn_net_lib.o isdn_v110.o isdn_common.o

    in this example, the module name will be isdn.o. kbuild will
    compile the objects listed in $(isdn-objs) and then run
    "$(ld) -r" on the list of these files to generate isdn.o.

    kbuild recognises objects used for composite objects by the suffix
    -objs, and the suffix -y. this allows the makefiles to use
    the value of a config_ symbol to determine if an object is part
    of a composite object.

    example:
        #fs/ext2/makefile
            obj-$(config_ext2_fs)        = ext2.o
         ext2-y                       := balloc.o bitmap.o
            ext2-$(config_ext2_fs_xattr) = xattr.o
    
    in this example xattr.o is only part of the composite object
    ext2.o, if $(config_ext2_fs_xattr) evaluates to 'y'.

    note: of course, when you are building objects into the kernel,
    the syntax above will also work. so, if you have config_ext2_fs=y,
    kbuild will build an ext2.o file for you out of the individual
    parts and then link this into built-in.o, as you would expect.

--- 3.4 objects which export symbols - export-objs

    when using loadable modules, not every global symbol in the
    kernel / other modules is automatically available, only those
    explicitly exported are available for your module.

    to make a symbol available for use in modules, to "export" it,
    use the export_symbol() directive in your source. in
    addition, you need to list all object files which export symbols
    (i.e. their source contains an export_symbol() directive) in the
    makefile variable $(export-objs).

    example:
        #drivers/isdn/i4l/makefile
        # objects that export symbols.
        export-objs     := isdn_common.o

    since isdn_common.c contains

        export_symbol(register_isdn);

    which makes the function register_isdn available to
    low-level isdn drivers.
    there exist a export_symbol_gpl() variant with similar functionality,
    but more restrictive with what may use that symbol. the requirement
    to list the .o file in export-objs is the same.

--- 3.5 library file goals - l_target

    instead of building a built-in.o file, you may also
    build an archive which again contains objects listed in $(obj-y).
    this is normally not necessary and only used in lib/ and
    arch/$(arch)/lib directories.
    only the name lib.a is allowed.

    example:
        #arch/i386/lib/makefile
        l_target := lib.a
        obj-y    := checksum.o delay.o

    this will create a library lib.a based on checksum.o and delay.o.

--- 3.6 descending down in directories

    a makefile is only responsible for building objects in its own
    directory. files in subdirectories should be taken care of by
    makefiles in these subdirs. the build system will automatically
    invoke make recursively in subdirectories, provided you let it know of
    them.

    to do so obj-y and obj-m are used.
    ext2 lives in a separate directory, and the makefile present in fs/
    tells kbuild to descend down using the following assignment.

    example:
        #fs/makefile
        obj-$(config_ext2_fs) = ext2/

    if config_ext2_fs is set to either 'y' (built-in) or 'm' (modular)
    the corresponding obj- variable will be set, and kbuild will descend
    down in the ext2 directory.
    kbuild only uses this information to decide that it needs to visit
    the directory, it is the makefile in the subdirectory that
    specifies what is modules and what is built-in.

    it is good practice to use a config_ variable when assigning directory
    names. this allows kbuild to totally skip the directory if the
    corresponding config_ option is neither 'y' nor 'm'.

--- 3.7 compilation flags

    extra_cflags, extra_aflags, extra_ldflags, extra_arflags

    all the extra_ variables apply only to the kbuild makefile
    where they are assigned. the extra_ variables apply to all
    commands executed in the kbuild makefile.

    $(extra_cflags) specifies options for compiling c files with
    $(cc).

    example:
        # drivers/sound/emu10k1/makefile
        extra_cflags = -i$(obj)
        ifdef debug
            extra_cflags = -demu10k1_debug
        endif


    this variable is necessary because the top makefile owns the
    variable $(cflags) and uses it for compilation flags for the
    entire tree.

    $(extra_aflags) is a similar string for per-directory options
    when compiling assembly language source.

    example:
        #arch/x86_64/kernel/makefile
        extra_aflags := -traditional


    $(extra_ldflags) and $(extra_arflags) are similar strings for
    per-directory options to $(ld) and $(ar).

    example:
        #arch/m68k/fpsp040/makefile
        extra_ldflags := -x

    cflags_$@, aflags_$@

    cflags_$@ and aflags_$@ only apply to commands in current
    kbuild makefile.

    $(cflags_$@) specifies per-file options for $(cc).  the $@
    part has a literal value which specifies the file that it is for.

    example:
        # drivers/scsi/makefile
        cflags_aha152x.o =   -daha152x_stat -dautoconf
        cflags_gdth.o    = # -ddebug_gdth=2 -d__serial__ -d__com2__ \
                     -dgdth_statistics
        cflags_seagate.o =   -darbitrate -dparity -dseagate_use_asm

    these three lines specify compilation flags for aha152x.o,
    gdth.o, and seagate.o

    $(aflags_$@) is a similar feature for source files in assembly
    languages.

    example:
        # arch/arm/kernel/makefile
        aflags_head-armv.o := -dtextaddr=$(textaddr) -traditional
        aflags_head-armo.o := -dtextaddr=$(textaddr) -traditional

--- 3.9 dependency tracking

    kbuild track dependencies on the following:
    1) all prerequisite files (both *.c and *.h)
    2) config_ options used in all prerequisite files
    3) command-line used to compile target

    thus, if you change an option to $(cc) all affected files will
    be re-compiled.

--- 3.10 special rules

    special rules are used when the kbuild infrastructure does
    not provide the required support. a typical example is
    header files generated during the build process.
    another example is the architecture specific makefiles which
    needs special rules to prepare boot images etc.

    special rules are written as normal make rules.
    kbuild is not executing in the directory where the makefile is
    located, so all special rules shall provide a relative
    path to prerequisite files and target files.

    two variables are used when defining special rules:

    $(src)
    $(src) is a relative path which points to the directory
    where the makefile is located. always use $(src) when
    referring to files located in the src tree.

    $(obj)
    $(obj) is a relative path which points to the directory
    where the target is saved. always use $(obj) when
    referring to generated files.

    example:
        #drivers/scsi/makefile
        $(obj)/53c8xx_d.h: $(src)/53c7,8xx.scr $(src)/script_asm.pl
            $(cpp) -dchip=810 - < $< | ... $(src)/script_asm.pl

    this is a special rule, following the normal syntax
    required by make.
    the target file depends on two prerequisite files. references
    to the target file are prefixed with $(obj), references
    to prerequisites are referenced with $(src) (because they are not
    generated files).


=== 4 host program support

kbuild supports building executables on the host for use during the
compilation stage.
two steps are required in order to use a host executable.

the first step is to tell kbuild that a host program exists. this is
done utilising the variable host-prog.

the second step is to add an explicit dependency to the executable.
this can be done in two ways. either add the dependency in a rule,
or utilise the variable build-targets.
both possibilities are described in the following.

--- 4.1 simple host program

    in some cases there is a need to compile and run a program on the
    computer where the build is running.
    the following line tells kbuild that the program bin2hex shall be
    built on the build host.

    example:
        host-progs := bin2hex

    kbuild assumes in the above example that bin2hex is made from a single
    c-source file named bin2hex.c located in the same directory as
    the makefile.
 
--- 4.2 composite host programs

    host programs can be made up based on composite objects.
    the syntax used to define composite objetcs for host programs is
    similar to the syntax used for kernel objects.
    $(-objs) list all objects used to link the final
    executable.

    example:
        #scripts/lxdialog/makefile
        host-progs    := lxdialog 
        lxdialog-objs := checklist.o lxdialog.o

    objects with extension .o are compiled from the corresponding .c
    files. in the above example checklist.c is compiled to checklist.o
    and lxdialog.c is compiled to lxdialog.o.
    finally the two .o files are linked to the executable, lxdialog.
    note: the syntax -y is not permitted for host-programs.

--- 4.3 defining shared libraries 
 
    objects with extension .so are considered shared libraries, and
    will be compiled as position independent objects.
    kbuild provides support for shared libraries, but the usage
    shall be restricted.
    in the following example the libkconfig.so shared library is used
    to link the executable conf.

    example:
        #scripts/kconfig/makefile
        host-progs      := conf
        conf-objs       := conf.o libkconfig.so
        libkconfig-objs := expr.o type.o
 
    shared libraries always require a corresponding -objs line, and
    in the example above the shared library libkconfig is composed by
    the two objects expr.o and type.o.
    expr.o and type.o will be built as position independent code and
    linked as a shared library libkconfig.so. c is not supported for
    shared libraries.

--- 4.4 using c for host programs

    kbuild offers support for host programs written in c . this was
    introduced solely to support kconfig, and is not recommended
    for general use.

    example:
        #scripts/kconfig/makefile
        host-progs    := qconf
        qconf-cxxobjs := qconf.o

    in the example above the executable is composed of the c file
    qconf.cc - identified by $(qconf-cxxobjs).
   
    if qconf is composed by a mixture of .c and .cc files, then an
    additional line can be used to identify this.

    example:
        #scripts/kconfig/makefile
        host-progs    := qconf
        qconf-cxxobjs := qconf.o
        qconf-objs    := check.o
   
--- 4.5 controlling compiler options for host programs

    when compiling host programs, it is possible to set specific flags.
    the programs will always be compiled utilising $(hostcc) passed
    the options specified in $(hostcflags).
    to set flags that will take effect for all host programs created
    in that makefile use the variable host_extracflags.

    example:
        #scripts/lxdialog/makefile
        host_extracflags = -i/usr/include/ncurses
 
    to set specific flags for a single file the following construction
    is used:

    example:
        #arch/ppc64/boot/makefile
        hostcflags_piggyback.o := -dkernelbase=$(kernelbase)
 
    it is also possible to specify additional options to the linker.
 
    example:
        #scripts/kconfig/makefile
        hostloadlibes_qconf := -l$(qtdir)/lib

    when linking qconf it will be passed the extra option "-l$(qtdir)/lib".
 
--- 4.6 when host programs are actually built

    kbuild will only build host-programs when they are referenced
    as a prerequisite.
    this is possible in two ways:

    (1) list the prerequisite explicitly in a special rule.

    example:
        #drivers/pci/makefile
        host-progs := gen-devlist
        $(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
            ( cd $(obj); ./gen-devlist ) < $<

    the target $(obj)/devlist.h will not be built before
    $(obj)/gen-devlist is updated. note that references to
    the host programs in special rules must be prefixed with $(obj).

    (2) use $(build-targets)
    when there is no suitable special rule, and the host program
    shall be built when a makefile is entered, the $(build-targets)
    variable shall be used.

    example:
        #scripts/lxdialog/makefile
        host-progs    := lxdialog
        build-targets := $(host-progs)

    this will tell kbuild to build lxdialog even if not referenced in
    any rule.

=== 5 kbuild clean infrastructure

"make clean" deletes most generated files in the src tree where the kernel
is compiled. this includes generated files such as host programs.
kbuild knows targets listed in $(host-progs) and $(extra_targets) and
they are all deleted during "make clean".
files matching the patterns "*.[oas]", "*.ko", plus some additional files
generated by kbuild are deleted all over the kernel src tree when
"make clean" is executed.

additional files can be specified by means of $(clean-files).

    example:
        #drivers/pci/makefile
        clean-files := devlist.h classlist.h

when executing "make clean", the two files "devlist.h classlist.h" will
be deleted. kbuild knows that files specified by $(clean-files) are
located in the same directory as the makefile.

usually kbuild descends down in subdirectories due to "obj-* := dir/",
but in the architecture makefiles where the kbuild infrastructure
is not sufficent this sometimes needs to be explicit.

    example:
        #arch/i386/boot/makefile
        subdir- := compressed/

the above assignment instructs kbuild to descend down in the
directory compressed/ when "make clean" is executed.

to support the clean infrastructure in the makefiles that builds the
final bootimage there is an optional target named archclean:

    example:
        #arch/i386/makefile
        archclean:
            $(q)$(make) $(clean)=arch/i386/boot

when "make clean" is executed, make will descend down in arch/i386/boot,
and clean as usual. the makefile located in arch/i386/boot/ may use
the subdir- trick to descend further down.

note 1: arch/$(arch)/makefile cannot use "subdir-", because that file is
included in the top level makefile, and the kbuild infrastructure
is not operational at that point.

note 2: all directories listed in core-y, libs-y, drivers-y and net-y will
be visited during "make clean".

=== 6 architecture makefiles

the top level makefile sets up the environment and does the preparation,
before starting to descend down in the individual directories.
the top level makefile contains the generic part, whereas the
arch/$(arch)/makefile contains what is required to set-up kbuild
to the said architecture.
to do so arch/$(arch)/makefile sets a number of variables, and defines
a few targets.

when kbuild executes the following steps are followed (roughly):
1) configuration of the kernel => produced .config
2) store kernel version in include/linux/version.h
3) symlink include/asm to include/asm-$(arch)
4) updating all other prerequisites to the target prepare:
   - additional prerequisites are specified in arch/$(arch)/makefile
5) recursively descend down in all directories listed in
   init-* core* drivers-* net-* libs-* and build all targets.
   - the value of the above variables are extended in arch/$(arch)/makefile.
6) all object files are then linked and the resulting file vmlinux is
   located at the root of the src tree.
   the very first objects linked are listed in head-y, assigned by
   arch/$(arch)/makefile.
7) finally the architecture specific part does any required post processing
   and builds the final bootimage.
   - this includes building boot records
   - preparing initrd images and the like


--- 6.1 set variables to tweak the build to the architecture

    ldflags        generic $(ld) options

    flags used for all invocations of the linker.
    often specifying the emulation is sufficient.

    example:
        #arch/s390/makefile
        ldflags         := -m elf_s390
    note: extra_ldflags and ldflags_$@ can be used to further customise
    the flags used. see chapter 7.
   
    ldflags_module    options for $(ld) when linking modules

    ldflags_module is used to set specific flags for $(ld) when
    linking the .ko files used for modules.
    default is "-r", for relocatable output.

    ldflags_vmlinux    options for $(ld) when linking vmlinux

    ldflags_vmlinux is used to specify additional flags to pass to
    the linker when linking the final vmlinux.
    ldflags_vmlinux uses the ldflags_$@ support.

    example:
        #arch/i386/makefile
        ldflags_vmlinux := -e stext

    ldflags_blob    options for $(ld) when linking the initramfs blob

    the image used for initramfs is made during the build process.
    ldflags_blob is used to specify additional flags to be used when
    creating the initramfs_data.o file.
    example:
        #arch/i386/makefile
        ldflags_blob := --format binary --oformat elf32-i386

    objcopyflags    objcopy flags

    when $(call if_changed,objcopy) is used to translate a .o file,
    then the flags specified in objcopyflags will be used.
    $(call if_changed,objcopy) is often used to generate raw binaries on
    vmlinux.

    example:
        #arch/s390/makefile
        objcopyflags := -o binary

        #arch/s390/boot/makefile
        $(obj)/image: vmlinux force
            $(call if_changed,objcopy)

    in this example the binary $(obj)/image is a binary version of
    vmlinux. the usage of $(call if_changed,xxx) will be described later.

    aflags        $(as) assembler flags

    default value - see top level makefile
    append or modify as required per architecture.

    example:
        #arch/sparc64/makefile
        aflags = -m64 -mcpu=ultrasparc

    cflags        $(cc) compiler flags

    default value - see top level makefile
    append or modify as required per architecture.

    often the cflags variable depends on the configuration.

    example:
        #arch/i386/makefile
        cflags-$(config_m386) = -march=i386
        cflags = $(cflags-y)

    many arch makefiles dynamically run the target c compiler to
    probe supported options:

        #arch/i386/makefile
        check_gcc = $(shell if $(cc) $(1) -s -o /dev/null -xc \
                    /dev/null\ > /dev/null 2>&1; then echo "$(1)"; \
                    else echo "$(2)"; fi)
        cflags-$(config_mcyrixiii) = $(call check_gcc,\
                                             -march=c3,-march=i486)

        cflags = $(cflags-y)

    the above examples both utilise the trick that a config option expands
    to 'y' when selected.

    cflags_kernel    $(cc) options specific for built-in

    $(cflags_kernel) contains extra c compiler flags used to compile
    resident kernel code.

    cflags_module    $(cc) options specific for modules

    $(cflags_module) contains extra c compiler flags used to compile code
    for loadable kernel modules.

 
--- 6.2 add prerequisites to prepare:

    the prepare: rule is used to list prerequisites that needs to be
    built before starting to descend down in the subdirectories.
    this is usual header files containing assembler constants.

        example:
        #arch/s390/makefile
        prepare: include/asm-$(arch)/offsets.h

    in this example the file include/asm-$(arch)/offsets.h will
    be built before descending down in the subdirectories.
    see also chapter xxx-todo that describe how kbuild supports
    generating offset header files.


--- 6.3 list directories to visit when descending

    an arch makefile cooperates with the top makefile to define variables
    which specify how to build the vmlinux file.  note that there is no
    corresponding arch-specific section for modules; the module-building
    machinery is all architecture-independent.

   
    head-y, init-y, core-y, libs-y, drivers-y, net-y

    $(head-y) list objects to be linked first in vmlinux.
    $(libs-y) list directories where a libs.a archive can be located.
    the rest list directories where a built-in.o object file can be located.

    $(init-y) objects will be located after $(head-y).
    then the rest follows in this order:
    $(core-y), $(libs-y), $(drivers-y) and $(net-y).

    the top level makefile define values for all generic directories,
    and arch/$(arch)/makefile only adds architecture specific directories.

    example:
        #arch/sparc64/makefile
        core-y = arch/sparc64/kernel/
        libs-y = arch/sparc64/prom/ arch/sparc64/lib/
        drivers-$(config_oprofile)  = arch/sparc64/oprofile/


--- 6.4 architecture specific boot images

    an arch makefile specifies goals that take the vmlinux file, compress
    it, wrap it in bootstrapping code, and copy the resulting files
    somewhere. this includes various kinds of installation commands.
    the actual goals are not standardized across architectures.

    it is common to locate any additional processing in a boot/
    directory below arch/$(arch)/.

    kbuild does not provide any smart way to support building a
    target specified in boot/. therefore arch/$(arch)/makefile shall
    call make manually to build a target in boot/.

    the recommended approach is to include shortcuts in
    arch/$(arch)/makefile, and use the full path when calling down
    into the arch/$(arch)/boot/makefile.

    example:
        #arch/i386/makefile
        boot := arch/i386/boot
        bzimage: vmlinux
            $(q)$(make) $(build)=$(boot) $(boot)/$@

    "$(q)$(make) $(build)=" is the recommended way to invoke
    make in a subdirectory.

    there are no rules for naming of the architecture specific targets,
    but executing "make help" will list all relevant targets.
    to support this $(archhelp) must be defined.

    example:
        #arch/i386/makefile
        define archhelp
          echo  '* bzimage      - image (arch/$(arch)/boot/bzimage)'
        endef

    when make is executed without arguments, the first goal encountered
    will be built. in the top level makefile the first goal present
    is all:.
    an architecture shall always per default build a bootable image.
    in "make help" the default goal is highlighted with a '*'.
    add a new prerequisite to all: to select a default goal different
    from vmlinux.

    example:
        #arch/i386/makefile
        all: bzimage

    when "make" is executed without arguments, bzimage will be built.

--- 6.5 building non-kbuild targets

    extra_targets

    extra_targets specify additional targets created in current
    directory, in addition to any targets specified by obj-*.

    listing all targets in extra_targets is required for three purposes:
    1) avoid that the target is linked in as part of built-in.o
    2) enable kbuild to check changes in command lines
       - when $(call if_changed,xxx) is used
    3) kbuild knows what file to delete during "make clean"

    example:
        #arch/i386/kernel/makefile
        extra_targets := head.o init_task.o

    in this example extra_targets is used to list object files that
    shall be built, but shall not be linked as part of built-in.o.

    example:
        #arch/i386/boot/makefile
        extra_targets := vmlinux.bin bootsect bootsect.o

    in this example extra_targets is used to list all intermediate
    targets, and all final targets.
    the targets are added to extra_targets to enable 2) and 3) above.
   
--- 6.6 commands useful for building a boot image

    kbuild provide a few macros that are useful when building a
    boot image.

    if_changed

    if_changed is the infrastructure used for the following commands.

    usage:
        target: source(s) force
            $(call if_changed,ld/objcopy/gzip)

    when the rule is evaluated it is checked to see if any files
    needs an update, or the commandline has changed since last
    invocation. the latter will force a rebuild if any options
    to the executable have changed.
    any target that utilises if_changed must be listed in extra_targets,
    otherwise the command line check will fail, and the target will
    always be built.
    if_changed may be used in conjunction with custom commands as
    defined in 6.7 "custom kbuild commands".
    note: it is a typical mistake to forget the force prerequisite.

    ld
    link target. often ldflags_$@ is used to set specific options to ld.
   
    objcopy
    copy binary. uses objcopyflags usually specified in
    arch/$(arch)/makefile.

    gzip
    compress target. use maximum compression to compress target.


--- 6.7 custom kbuild commands

    when kbuild is executing with kbuild_verbose=0 then only a shorthand
    of a command is normally displayed.
    to enable this behaviour for custom commands kbuild requires
    two variables to be set:
    quiet_cmd_    - what shall be echoed
          cmd_    - the command to execute

    example:
        #
        quiet_cmd_image = build   $@
              cmd_image = $(obj)/tools/build $(buildflags) \
                                             $(obj)/vmlinux.bin > $@

        $(obj)/bzimage: $(obj)/vmlinux.bin $(obj)/tools/build force
            $(call if_changed,image)
            @echo 'kernel: $@ is ready'

    when updating the $(obj)/bzimage target the line:

    build    arch/i386/boot/bzimage

    will be displayed with "make kbuild_verbose=0".
   

=== 7 kbuild variables

the top makefile exports the following variables:

    version, patchlevel, sublevel, extraversion

    these variables define the current kernel version.  a few arch
    makefiles actually use these values directly; they should use
    $(kernelrelease) instead.

    $(version), $(patchlevel), and $(sublevel) define the basic
    three-part version number, such as "2", "4", and "0".  these three
    values are always numeric.

    $(extraversion) defines an even tinier sublevel for pre-patches
    or additional patches.    it is usually some non-numeric string
    such as "-pre4", and is often blank.

    kernelrelease

    $(kernelrelease) is a single string such as "2.4.0-pre4", suitable
    for constructing installation directory names or showing in
    version strings.  some arch makefiles use it for this purpose.

    arch

    this variable defines the target architecture, such as "i386",
    "arm", or "sparc". some kbuild makefiles test $(arch) to
    determine which files to compile.

    by default, the top makefile sets $(arch) to be the same as the
    host system architecture.  for a cross build, a user may
    override the value of $(arch) on the command line:

        make arch=m68k ...


    install_path

    this variable defines a place for the arch makefiles to install
    the resident kernel image and system.map file.
    use this for architecture specific install targets.

    install_mod_path, modlib

    $(install_mod_path) specifies a prefix to $(modlib) for module
    installation.  this variable is not defined in the makefile but
    may be passed in by the user if desired.

    $(modlib) specifies the directory for module installation.
    the top makefile defines $(modlib) to
    $(install_mod_path)/lib/modules/$(kernelrelease).  the user may
    override this value on the command line if desired.

=== 8 makefile language

the kernel makefiles are designed to run with gnu make.  the makefiles
use only the documented features of gnu make, but they do use many
gnu extensions.

gnu make supports elementary list-processing functions.  the kernel
makefiles use a novel style of list building and manipulation with few
"if" statements.

gnu make has two assignment operators, ":=" and "=".  ":=" performs
immediate evaluation of the right-hand side and stores an actual string
into the left-hand side.  "=" is like a formula definition; it stores the
right-hand side in an unevaluated form and then evaluates this form each
time the left-hand side is used.

there are some cases where "=" is appropriate.  usually, though, ":="
is the right choice.

=== 9 credits

original version made by michael elizabeth chastain,
updates by kai germaschewski
updates by sam ravnborg

=== 10 todo

- describe how kbuild support shipped files with _shipped.
- generating offset header files.
- add more variables to section 7?

from :